Operating mass:
Bucket capacity:
Rated power:
*For the high dust working environment of the loader, the three-stage air filter is adopted to effectively reduce the early wear and tear failure rate of the engine and prolong the service life;
*Multi-stage fuel filter with good fuel adaptability and clean engine system.
ZF Gearbox
*World-Famous German ZF gearbox with high reliability and comfortable operation, which can greatly reduce maintenance costs
Braking System
*The brake system has a dry, backflushing device to prevent corrosion of the pipeline and freezing in winter, making the brakes more reliable and safer.
Hydraulic system
*The hydraulic system is a constant variable, and the steering pump is a variable displacement piston pump with high bearing pressure and high reliability.
*The hydraulic system filter has a filtration ratio of 200 (99.5% impurities can be filtered out), and the system is cleaner and more reliable.
Enhanced drive axle
*Optimal design of axle housing, increased cross section, increased bearing on the wheel side, and bearing capacity of the front axle up to 42t
*Enhanced main reduction and enhanced wheel edge life by 30%
*The rear axle is the center swing bridge, which has higher reliability.
*Drive shaft connection adopts face tooth structure, high transmission torque and high reliability
Structural parts and articulation
*The new reinforced frame and patented composite hinge structure, after millions of bench impact fatigue experiments, 1000 hours of intensive experiments, 5000 hours of industrial experiments, to achieve super load carrying capacity.
*The bucket material adopts JF440 jointly developed with domestic famous steel mills, which has higher strength and better wear resistance;
*The bushing adopts 20CrMnTi honeycomb bushing, the inner surface adopts the patented spraying process, has self-lubricating function and long service life.
Comfortable operation
*Multi-stage hydraulic power control system, steering is light and accurate;
*High backrest, high performance mechanical suspension seat to reduce the fatigue of drivers and passengers;
*Work hydraulic pilot operation, easy to operate, and good coordination (optional).
*Pedal and various control components meet the best design of ergonomics, and do not fatigue for a long time.
*High backrest, high performance mechanical suspension seat to reduce the fatigue of drivers and passengers
*Working hydraulic pilot operation, the pilot operating box can be adjusted according to the operator's comfort, the operation is light and the coordination is good.
Comfortable driving environment
*Integral fully enclosed skeletal structure cab, anti-rolling, falling objects, low noise, creating a safe and healthy driving environment;
*Rearview mirrors are equipped at the rear of the hood to eliminate blind spots and safer reversing,The driver can always know the surroundings of the equipment during the operation.
*Rear view mirror or optional reversing image is available at the rear of the hood to eliminate blind spots and safer reversing
*With a micro-charged air conditioning system, the environment is cleaner and more comfortable
*The instrument has fault information display function to improve human-computer interaction.
Simplify daily inspections and longer maintenance intervals.
Easy daily maintenance
*The hood adopts large side door, upturned design, large opening angle, engine air filter, machine filter, diesel filter, double-change filter "one-stop" maintenance;
*The pin lubrication point is taken out for convenient daily maintenance;
*The brake system has a dry backflushing device to reduce the number of times the gas cylinder is discharged;
*Single-layer parallel radiator, anti-blocking and easy to clean;
*A transparent kettle is installed on the radiator to display the antifreeze liquid level for easy observation;
*GPS remote fault diagnosis to improve detection efficiency;
*The brake caliper adopts an open split structure, and the brake pads are easily replaced without disassembling the tires;
*The hydraulic system is equipped with a quick-change coupling for easy testing and maintenance.
*The ZF tank oil filter is separately taken out for easier maintenance.
Extended maintenance cycle
Longer maintenance intervals and maintenance intervals, increasing machine utilization while drastically reducing
Low operating expenses.

Wide applicability
Environmental adaptability
*Normal use at ambient temperature -35 ° C to +45 ° C (optional cold start device);
*Meet the normal operation of 3000 meters above sea level;
*High-flow, high-precision filtration systems for each system meet the needs of high-dust environments;
*Optional oil bath filter for engine air filtration system
Condition adaptation
* Choose different buckets and attachments according to different materials.


The FL966H-ETX+ multi-functional accessory can be equipped with standard arm/long arm, which can be equipped with standard bucket, rock bucket, coal bucket, wood grabber and flat fork according to different working conditions.
Description Unit
Standard boom Unloading height(mm) Extended boom Unloading height(mm) Super long boom Unloading height(mm) Coal-specific U-boom Unloading height(mm)
Standard bucket 3.5 3210 3601 3842 / /
Increase bucket 4.0 3154 3544 3785 / /
  4.2 3091 3480 3721 / /
  5.0 / / 3424 3665 / /
U-shaped coal special bucket 6.0 / / / / / / 3345
U-shaped bucket 4.5 / / / / / / 3473
Rock bucket 3.0 3236 / / / / / /
Side bucket 2.8 3029 / / / / / /
Iron sand bucket 2.8 3342 3732 / / / /
Marble fork   ---- / / / / / /
Wood grab machine   3392 / / / / / /
              ●Standard combination  ○Optional combination  /
Special needs
Technical Parameters(Long arm)  
Outline distance (LXWXH) 8910*3050*3460
Rated load(kg) 6000
Operating mass(kg) 21710
Wheelbase(mm) 3400
Digging force(kN) 195
Bucket outer turning radius(mm) 7280
Steering angle(°) 38
Unloading height(mm) 3600
Wheel tread(mm) 2250
Traction(kN) 180
Sum of three items(s) 11
Gradeability(°) 29
Unloading distance(mm) 1240